HAILICARBON is the RP grade Graphite Electrode factory

HAILICARBON is the RP Graphite Electrode factory.

HAILICARBON is the RP Graphite Electrode factory

RP(regular power ) Graphite Electrode factory in China

  1. Product detail

    Graphite electrode raw materials use the domestic petroleum coke and pitch coke. HP grade graphite electrode add 30% imported needle coke. UHP graphite electrode use more than 80% imported needle coke. They are widely used in electric arc furnace, ladle furnace for the production of alloy steel, metal and nonmetallic materials. They are characterized by low resistivity, good electric and thermal conductivity, high resistance to oxidation and thermal shock, high mechanical strength, etc

  2. Specification list

                                         RP GRAPHITE ELECTRODE TECHNICAL DATA

Item

unit

Dia 200-300

Dia 300-600

electrode

nipple

electrode

nipple

Electrical resistivity

μΩm

8.5

6.5

8.5

6.5

Bulk density

g/cm3

1.53

1.69

1.52

1.69

Flexural strongth

Mpa

8.5

15

7.0

15

Elastic modulus

Gpa

9.3

14

9.3

14

Ash

%

0.5

0.5

0.5

0.5

CET(100℃-600℃)

×10-6/℃

2.9

2.8

2.9

2.8

 3. Application

      1. Widely used in electric arc furnace and ladle refining furnace for steelmaking

      2. Widely used in the electric smelting furnace for producing the ferroalloy, pure silicon, yellow   phosphorus, copper matte, calcium carbide and so on.

      3. Widely used in the electrical resistance furnace for glass melting, silicon carbide making, graphite product manufacturing, etc


4. Instruction

  1. graphite electrode should avoid the moisture, the dust, the contamination and collision

  2. You should be careful when moving and pilling electrode with forklift. Collision and overload is forbidden. Notice and alignment to avoid slide or breakage

  3. Electrode should be stored in the clean and dry place, when pilling up outdoors, it should be covered with rain-proof tarpaulin

  4. Before connecting, clean electrode threads and sockets with compressed air

  5. Lift the electrode to furnace using holster with resilient hanger, find out the center and move slowly downwards

  6. Clean small opening with compressed-air when upper and lower electrodes declined to put distance between 2030mm

  7. Electrode clamp holder must be placed between the two white guard lines. Clamp holder and interfaces of the electrode must be cleaned regularly with allowable good touch with electrode. Cooling water jacket of the clamp holder should be tight to prevent water leakage

  8. To avoid the electrode breakage, insulating materials should not be put into the furnace. The working current of electrode must be conformity with the allowable current of electrode in the instructions.

---

HAILICARBON  is the manufacturer for graphite electrode, UHP, HP, RP Grade and diameter size 150-600mm. If you need the graphite electrode for steel industry, please contact us, we are professional on it and have experience on exporting to Russia, Ukraine, Colombia, Africa etc..

RP150mm Graphite electrode

RP200mm Graphite electrode

RP250mm Graphite electrode

RP300mm graphite electrode

RP350mm graphite electrode

RP400mm graphite electrode

RP450mm graphite electrode

RP500mm Graphite electrode

RP550mm graphite electrode

RP555 graphite electrode

EG RP150-600mm graphite electrode


Recommended